What we supply
Select a category to jump to the detailed range.
Electrical Cables & Accessories
Low, medium and high voltage power, control and instrumentation cables with the full accessory range.
Explosion Proof Equipment, JB, Lights & IP Rated Panels
IECEx and ATEX certified equipment for Zone 1, Zone 2 and other classified hazardous areas.
Industrial Tools & Equipment
Hand, power, pneumatic, hydraulic, lifting and workshop equipment for site and maintenance teams.
Construction & Raw Materials
Structural steel, piping, finishing consumables and safety materials for infrastructure and plant projects.
Valves & Pipes
Gate, globe, ball, butterfly, check and control valves with the matching piping and fittings.
Instrumentation Fittings, Gauges & Valves
Tube fittings, tubing, pressure and temperature gauges and small-bore instrument valves for hook-up and calibration work.
Gaskets & Seals
Spiral wound, RTJ, PTFE and metal jacketed gaskets plus the full sealing range for rotating equipment.
Safety Equipment & PPE
Head-to-toe protection certified to international standards for hazardous work environments.
Office Equipment & Supplies
IT hardware, furniture and consumables for corporate offices, project sites and industrial facilities.
Production & Drilling Chemicals
Separation, flow assurance and integrity chemistry — corrosion and scale inhibitors, oxygen scavengers, biocides, demulsifiers and drag reducers — tested before they are proposed.
Fasteners
Bolts, nuts, studs, washers, screws and anchors to international standards.
Sign Boards
Safety, mandatory, prohibition, emergency and traffic signage in weatherproof materials.
Critical & Non-Critical Spare Parts
OEM-sourced spares with emergency and expedited procurement to keep operations running.
Electrical Cables & Accessories
We specialise in the supply of a comprehensive range of electrical cables and accessories designed to meet the requirements of oil & gas, industrial, commercial and infrastructure projects. Our products are sourced from reputable manufacturers and comply with international standards to ensure safety, durability and reliable performance in all operating conditions. These cables are engineered to perform efficiently in harsh environments, including high temperature, high pressure and corrosive conditions commonly found in oilfield and industrial applications.
Cable portfolio
- Low, medium and high voltage power cables
- Control and instrumentation cables
- Armoured cables
- Rubber cables
Accessories
- Cable glands
- Lugs
- Trays and ladders
- Cleats and clamps
- Termination kits
- Jointing materials
Our technical team assists clients in selecting the right products based on project specification and standards compliance, and our supply network supports both routine requirements and urgent project demands.
Power, control and instrumentation cables
| Cable type | Conductor & cores | Voltage rating | Insulation / construction | Standard |
|---|---|---|---|---|
| LV power cable | Cu or Al · 1–5 core · 1.5–630 mm² | 600/1000 V | XLPE/PVC, SWA or AWA armour | IEC 60502-1 · BS 5467 |
| MV power cable | Cu · 1 & 3 core · 25–630 mm² | 6.35/11 kV – 19/33 kV | XLPE, copper wire screen | IEC 60502-2 |
| Control cable | Cu · 2–61 core · 0.5–2.5 mm² | 300/500 V | PVC or XLPE, SWA armour | BS 5308 Pt 2 · IEC 60227 |
| Instrumentation cable | Cu pairs / triads · 0.5–1.5 mm² | 300/500 V | Individual & overall screen, PE/PVC | BS 5308 Pt 1 · EN 50288-7 |
| Fire-resistant cable | Cu · 1–4 core | 600/1000 V | Mica tape barrier, LSZH sheath | BS 6387 CWZ · IEC 60331 |
| Rubber / trailing cable | Cu · 3–5 core · 1.5–95 mm² | 450/750 V | EPR insulation, CSP sheath | BS 6500 · IEC 60245 |
Glands, terminations and cable management
| Item | Size range | Materials | Rating / standard |
|---|---|---|---|
| Industrial cable glands | M16 – M63 · PG9 – PG48 | Brass, nickel-plated brass, SS316 | IP66 / IP68 · BS 6121 · IEC 62444 |
| Hazardous-area glands | M20 – M75 | Brass, SS316 | Ex d IIC / Ex e II · ATEX & IECEx |
| Compression lugs & ferrules | 1.5 – 630 mm² | Electrolytic copper, tinned | DIN 46235 · BS 4579 |
| Cable tray & ladder | 50 – 900 mm width | Pre-galvanised, HDG, SS316, GRP | IEC 61537 |
| Cleats & clamps | 15 – 130 mm cable dia. | Aluminium, SS316, polymer | IEC 61914, short-circuit rated |
| Termination & jointing kits | LV up to 33 kV | Cold-shrink and heat-shrink | IEC 60502 |
Drum lengths, screening arrangements and armour types to project specification.
Explosion Proof Equipment, JB, Lights & IP Rated Panels
We specialise in the supply of high-quality explosion-proof equipment designed for use in hazardous and potentially explosive environments commonly found in oil & gas, petrochemical, marine and industrial sectors. Our products are engineered to ensure maximum safety, reliability and compliance with international standards such as IECEx, ATEX and other relevant certifications.
Lighting & accessories
- LED flood lights for outdoor and large-area illumination
- Explosion-proof luminaires (Zone 1 & Zone 2 certified)
- Wall-mounted and bulkhead lights
- Emergency lighting systems
- Solar powered IP rated lights
Junction boxes
- General purpose junction boxes
- Weatherproof junction boxes
- Explosion-proof junction boxes
- Stainless steel & aluminium junction boxes
- GRP (fibreglass) junction boxes
- Terminal junction boxes
IP rated panels & enclosures
- Distribution panels (IP54, IP55, IP65, IP66, IP67)
- Weatherproof outdoor electrical panels
- Stainless steel and powder-coated enclosures
- Custom-built panels as per project requirements
Control & fittings
- Control stations
- Switches, sockets and enclosures
- Cable glands
- Electrical fittings
Hazardous-area lighting and enclosures
| Item | Protection concept | Gas group / temp class | Ingress | Certification |
|---|---|---|---|---|
| Flameproof luminaire | Ex db | IIC · T4 / T6 | IP66 | IECEx · ATEX · IEC 60079-1 |
| Increased-safety luminaire | Ex eb mb | IIC · T4 | IP66 | IECEx · ATEX · IEC 60079-7 |
| Ex junction box, GRP | Ex e | IIC · T6 | IP66 | IEC 60079-7 |
| Ex junction box, alloy / SS316 | Ex d | IIB + H₂ · T6 | IP66 | IEC 60079-1 |
| Ex control station | Ex de | IIC · T6 | IP66 | IEC 60079-0 / -1 / -7 |
| Ex plug & socket | Ex de | IIC · T6 | IP66 / IP67 | IEC 60309 + IEC 60079 |
Zone 1 and Zone 2 equipment supplied with certificate of conformity and manufacturer’s declaration.
Panels, enclosures and general-area lighting
| Item | Rating | Materials | Standard |
|---|---|---|---|
| Distribution panel | IP54 – IP67 | Powder-coated steel, SS304, SS316 | IEC 61439-1 / -2 |
| Weatherproof enclosure | IP65 / IP66 | GRP, polycarbonate, aluminium | IEC 60529 |
| Custom-built panel | To project specification | As specified | IEC 61439 |
| LED floodlight | IP66 | Die-cast aluminium | IEC 60598 |
| Emergency & exit luminaire | IP65 | Polycarbonate | IEC 60598-2-22 |
| Solar-powered area light | IP65 / IP66 | Aluminium, tempered glass | IEC 60598 · IEC 61215 panel |
Industrial Tools & Equipment
A complete tooling programme for construction, maintenance and turnaround work — from technician hand tools through to hydraulic torque equipment and workshop plant.
Hand tools
- Wrenches, spanners and socket sets
- Screwdrivers and tool kits
- Pliers, cutters and crimping tools
- Hammers and striking tools
- Measuring tools (tape measures, callipers, levels)
Power tools
- Electric drills and hammer drills
- Angle grinders and cutters
- Impact wrenches and screwdrivers
Pneumatic tools
- Air impact wrenches
- Pneumatic drills and grinders
- Spray guns and air blowers
Hydraulic tools & equipment
- Hydraulic jacks and cylinders
- Hydraulic torque wrenches
- Crimping and cutting tools
- Hydraulic pumps and pullers
Lifting & material handling
- Chain blocks and lever hoists
- Webbing slings and wire ropes
- Shackles, hooks and lifting accessories
- Trolleys and material handling systems
Workshop & maintenance
- Welding machines and accessories
- Air compressors
- Generators and pressure washers
- Lubrication equipment
- Tool storage systems and workbenches
Construction & Raw Materials
We supply a wide range of high-quality construction and raw materials to support infrastructure, industrial and oil & gas projects. Our materials are sourced from trusted manufacturers and meet international standards to ensure strength, durability and reliability in all types of construction environments.
Structural materials
- Steel bars (rebar) and structural steel
- Beams, channels and angles
- Steel plates and sheets
- Pipes and hollow sections
Plumbing & piping materials
- PVC, HDPE and PPR pipes
- Pipe fittings and valves
- Water tanks and drainage systems
Finishing & consumables
- Paints and coatings
- Sealants and adhesives
- Waterproofing materials
Safety & PPE tools
- Personal protective equipment (helmets, gloves, safety shoes)
- Gas detectors and safety instruments
- Lockout/Tagout (LOTO) devices
- Fire safety equipment
Valves & Pipes
We supply a comprehensive range of high-quality valves and piping solutions designed to meet the demanding requirements of oil & gas, petrochemical, industrial and infrastructure projects. Our products are sourced from trusted manufacturers and comply with international standards to ensure durability, safety and reliable performance in critical applications.
Valve solutions
- Gate valves
- Globe valves
- Ball valves
- Butterfly valves
- Check valves (non-return valves)
- Control valves and pressure relief valves
Piping solutions
- Carbon steel, stainless steel and alloy steel pipes
- Seamless and welded pipes
- HDPE, PVC and GRP pipes
- Line pipes for oil, gas and water transmission
Fittings & accessories
- Elbows, tees, reducers and flanges
- Gaskets and sealing materials
- Couplings and connectors
- Pipe supports and clamps
- Weldnecks, blinds, threadolets and weldolets
Valves
| Valve type | Size range | Pressure class | Body materials | Design standard |
|---|---|---|---|---|
| Gate valve | ½″ – 24″ | 150 – 2500 lb | A216 WCB, A351 CF8M, LCC | API 600 · API 6D · BS 1414 |
| Globe valve | ½″ – 12″ | 150 – 1500 lb | WCB, CF8M | BS 1873 · API 623 |
| Ball valve, floating & trunnion | ½″ – 36″ | 150 – 2500 lb | WCB, CF8M, F51 duplex | API 6D · ISO 17292 |
| Butterfly valve | 2″ – 48″ | 150 – 300 lb | Ductile iron, WCB, CF8M | API 609 · EN 593 |
| Check valve | ½″ – 24″ | 150 – 2500 lb | WCB, CF8M | API 594 · BS 1868 |
| Pressure relief valve | ½″×1″ – 8″×10″ | Up to 2500 lb | WCB, CF8M | API 526 · ASME VIII |
Pipe, flanges and fittings
| Item | Size range | Schedule / pressure | Material grades | Standard |
|---|---|---|---|---|
| Seamless carbon steel pipe | ½″ – 24″ | SCH 10 – XXS | ASTM A106 Gr B, A333 Gr 6 | ASME B36.10M |
| Line pipe | 2″ – 48″ | Up to SCH 80 | API 5L Gr B – X65, PSL1 / PSL2 | API 5L |
| Stainless steel pipe | ½″ – 12″ | SCH 10S – 80S | ASTM A312 TP316 / TP316L | ASME B36.19M |
| HDPE pipe | 20 – 630 mm | PN6 – PN16 | PE100 | ISO 4427 |
| GRP / GRE pipe | 1″ – 40″ | Up to 40 bar | Epoxy and vinyl-ester | ISO 14692 |
| Flanges | ½″ – 48″ | 150 – 2500 lb | A105, A182 F316, F51 | ASME B16.5 · B16.47 |
| Butt-weld fittings | ½″ – 48″ | SCH 10 – XXS | A234 WPB, A403 WP316 | ASME B16.9 |
| Weldolets, threadolets, blinds | ½″ – 24″ | 3000 – 9000 lb | A105, F316 | MSS SP-97 · ASME B16.11 |
Sour-service items supplied to NACE MR0175 / ISO 15156 with material test certificates to EN 10204 3.1.
Instrumentation Fittings, Gauges & Valves
Instrument hook-up is where small components carry large consequences: a leaking ferrule or an out-of-class gauge can shut in a well just as effectively as a failed pump. We supply the fittings, tubing, gauges and small-bore valves that connect field instruments to process — sourced from established manufacturers, matched to line class and service conditions, and supplied with material certification and traceability where the project requires it.
Tube fittings & connectors
- Compression tube fittings, single and twin ferrule
- Unions, elbows, tees and crosses
- Reducers, adapters and bulkhead fittings
- NPT, BSP and metric male/female connectors
- Ferrules, nuts, plugs and caps
Tubing & supports
- Seamless stainless steel tubing (316 / 316L)
- Copper and alloy instrument tubing
- Instrument air hose and flexible connectors
- Tube clamps, brackets and supports
Gauges & indicators
- Pressure gauges to EN 837 — bourdon, capsule and diaphragm
- Differential pressure gauges
- Bimetal and gas-actuated temperature gauges
- Thermowells and test points
- Diaphragm and chemical seals
- Siphons, snubbers and gauge isolation valves
Instrument valves
- Needle valves
- Small-bore ball and plug valves
- Check and relief valves
- 2-valve, 3-valve and 5-valve manifolds
- Double block and bleed valves
- Monoflange valves
Fittings, tubing and instrument valves
| Item | Size range | Pressure rating | Materials | Standard |
|---|---|---|---|---|
| Twin-ferrule tube fitting | ⅛″ – 1″ · 3 – 25 mm | Up to 413 bar | 316 SS, brass, alloy 400 | ASTM A479 · ISO 8434-1 |
| Instrument tubing | ⅛″ – 1″ · 3 – 25 mm | Wall 0.028″ – 0.109″ | 316 / 316L seamless, annealed | ASTM A269 · A213 |
| Needle valve | ⅛″ – 1″ | Up to 690 bar | 316 SS, alloy 400 | ASME B31.3 |
| 2-, 3- and 5-valve manifold | ½″ NPT and flanged | Up to 413 bar | 316 SS, F51 duplex | IEC 61518 |
| Monoflange & double block and bleed | ½″ – 2″ | 150 – 2500 lb | 316, F51, F55 | API 6D · IEC 61518 |
| Small-bore ball valve | ¼″ – 1″ | Up to 414 bar | 316 SS, brass | ASME B16.34 |
Gauges, thermowells and seals
| Item | Dial / size | Range | Wetted materials | Standard |
|---|---|---|---|---|
| Bourdon pressure gauge | 63 / 100 / 150 mm | Vacuum – 1000 bar | 316 SS case and internals | EN 837-1 · class 1.0 / 1.6 |
| Differential pressure gauge | 100 / 160 mm | Up to 400 bar static | 316 SS | EN 837-1 |
| Bimetal temperature gauge | 100 / 150 mm | −70 to +600 °C | 316 SS stem | EN 13190 · ASME B40.200 |
| Thermowell | ¾″ – 1½″ | Flanged, threaded, weld-in | 316, 321, Inconel 625 | ASME PTC 19.3 TW |
| Diaphragm / chemical seal | ½″ – 2″ | Up to 400 bar | 316L, Hastelloy C276, tantalum | EN 837-3 |
| Siphon, snubber, gauge cock | ¼″ – ½″ | Up to 400 bar | 316 SS, carbon steel | ASME B31.3 |
Hook-up items for sour service supplied to NACE MR0175 / ISO 15156. Calibration certificates available on request.
Gaskets & Seals
Sealing solutions matched to service temperature, pressure and media — supplied to specification for flanged joints, pumps and hydraulic systems.
Gasket solutions
- Spiral wound gaskets (SWG)
- Ring Type Joint (RTJ) gaskets
- Non-asbestos compressed fibre gaskets
- PTFE (Teflon) gaskets
- Metal jacketed gaskets
- Full face and ring gaskets
Seal solutions
- O-rings (NBR, Viton, EPDM, Silicone)
- Oil seals and shaft seals
- Mechanical seals for pumps and rotating equipment
- Hydraulic and pneumatic seals
- Gland packing and braided packing
Safety Equipment & PPE
We supply a comprehensive range of high-quality safety equipment and PPE designed to protect personnel and ensure compliance with health, safety and environmental (HSE) standards across oil & gas, construction, industrial and manufacturing sectors. Our products are sourced from trusted manufacturers and meet international safety certifications.
Head, eye & face
- Safety helmets (hard hats) and bump caps
- Face shields and welding helmets
- Safety goggles and protective glasses
- Chemical splash protection
Hearing & respiratory
- Earplugs (disposable and reusable)
- Earmuffs for high-noise environments
- Disposable dust masks
- Half-face and full-face respirators
- Cartridge filters and air purifying respirators
- Self-Contained Breathing Apparatus (SCBA)
Body & foot protection
- Coveralls and workwear (FR and anti-static)
- High-visibility clothing
- Chemical protective suits
- Rainwear and thermal wear
- Safety shoes and boots (steel toe, anti-slip, anti-static)
- Rubber and chemical-resistant boots
Fall protection
- Safety harnesses
- Lanyards and lifelines
- Anchor points and fall arrest systems
Head, eye, hearing and respiratory protection
| Item | Specification | Standard |
|---|---|---|
| Safety helmet | Type I and Type II · vented and non-vented · 4- and 6-point harness | EN 397 · ANSI Z89.1 |
| Safety eyewear | Clear, smoke and amber lens · anti-fog, anti-scratch | EN 166 · ANSI Z87.1 |
| Chemical splash goggles | Indirect vent, wide vision | EN 166 3/4/5 · ANSI Z87.1 D3 |
| Ear plugs and ear muffs | SNR 26 – 37 dB | EN 352-1 · EN 352-2 |
| Disposable respirator | FFP2 / FFP3, valved and unvalved | EN 149 |
| Half and full-face respirator | A2B2E2K2-P3 cartridge range | EN 140 · EN 136 · EN 14387 |
| Self-contained breathing apparatus | 6.8 L composite, 300 bar, 30 / 45 min duration | EN 137 · NFPA 1981 |
Body, hand, foot and fall protection
| Item | Specification | Standard |
|---|---|---|
| FR coverall | 210 – 350 gsm · arc rating 8.7 – 12.4 cal/cm² · anti-static | NFPA 2112 · EN ISO 11612 · EN 1149-5 |
| High-visibility clothing | Class 2 and Class 3 · FR and non-FR | EN ISO 20471 · ANSI/ISEA 107 |
| Chemical protective suit | Type 3 / 4 / 5 / 6 | EN 14605 · EN ISO 13982 |
| Safety footwear | S1P and S3 · steel and composite toe · anti-static, penetration resistant | EN ISO 20345 · ASTM F2413 |
| Safety gloves | Cut level A1 – A9 · impact, chemical and heat resistant | EN 388 · EN 407 · EN ISO 21420 |
| Full-body harness | 1- and 2-point · rated to 140 kg | EN 361 · ANSI Z359.11 |
| Lanyards and fall arrest | Shock-absorbing lanyard · SRL 2 – 20 m | EN 355 · EN 360 |
| Portable gas detector | Single gas and 4-gas: O₂ / LEL / H₂S / CO | ATEX & IECEx certified · EN 60079-29 |
Sizing, branding and heat-stress ratings confirmed against site HSE requirements before supply.
Office Equipment & Supplies
We provide a comprehensive range of office equipment and supplies to support efficient workplace operations across corporate offices, project sites and industrial facilities. Our solutions are designed to enhance productivity, organisation and day-to-day administrative functions.
Equipment
- Computers, laptops and workstations
- Printers, scanners and multifunction devices
- Photocopiers and document management systems
- Projectors and presentation equipment
- Telecommunication systems (telephones, IP phones)
- Shredders and binding machines
Furniture
- Office desks and workstations
- Executive chairs and seating solutions
- Meeting tables and conference furniture
- Filing cabinets and storage units
Supplies
- Paper products (A4 paper, notebooks, envelopes)
- Writing instruments (pens, pencils, markers)
- Files, folders and organisers
- Printer cartridges and toners
Production & Drilling Chemicals
Amlak Fahud Trad. has partnered with leading chemical manufacturers to supply a complete programme of production and drilling chemicals to operators working in Oman. Rather than simply quoting a product line, we start with the application — the crude, the produced water chemistry, the temperature and pressure profile, the H₂S and CO₂ content and the separation train — and select chemistry that suits it. Samples are then tested and evaluated against your operating conditions, so performance is demonstrated before anything is committed to a wellsite or a plant.
Separation & flow assurance
- Antifoam
- Demulsifiers
- Emulsifiers
- Clarifiers
- Drag reducers
- Ethanol and glycol — hydrate inhibition and dehydration
Integrity & water treatment
- Corrosion inhibitors
- Scale inhibitors
- Oxygen scavengers
- Biocides
Drilling chemicals — weighting materials
- Barite (barium sulfate)
- Calcium carbonate
- Hematite
How we work
- Application review against well, fluid and plant conditions
- Product selection with the manufacturer’s technical support
- Bottle testing and field trials before commitment
- Techno-commercial proposal covering chemistry, dosage, results, logistics and price
- Continuous supply with performance monitoring and re-optimisation
Once testing confirms performance, we submit a single techno-commercial proposal — recommended chemistry, dosage rates, test data, supply logistics and pricing together — so your technical and commercial teams evaluate the same package and a decision can be made without a second round of enquiries.
Fasteners
We supply a wide range of high-quality fasteners designed for secure and reliable joining in oil & gas, construction, industrial and infrastructure applications. Our fasteners are manufactured to meet international standards and are suitable for use in demanding environments where strength, durability and corrosion resistance are critical.
Bolt & nut solutions
- Hex bolts and nuts
- Heavy hex bolts
- Stud bolts and threaded rods
- Anchor bolts
- High-tensile structural fasteners
Washers & accessories
- Flat washers
- Spring washers
- Lock washers
- Sealing washers
Screws & anchors
- Machine screws and self-tapping screws
- Wood screws and drywall screws
- Concrete anchors and expansion bolts
- Chemical anchors
Sign Boards
We supply a wide range of high-quality sign boards designed to enhance safety, communication and operational efficiency across oil & gas, industrial, construction and commercial environments. Our signage solutions are manufactured to meet international safety standards and are suitable for both indoor and outdoor applications.
Safety sign boards
- Warning signs (Caution, Danger, High Voltage)
- Mandatory signs (Wear PPE, Safety Instructions)
- Prohibition signs (No Smoking, No Entry)
- Emergency signs (Exit, Assembly Point, First Aid)
Traffic & road sign boards
- Speed limit signs
- Stop and yield signs
- Construction and detour signs
- Reflective road safety signage
Materials & types
- Aluminium and stainless steel
- Acrylic and PVC boards
- Reflective vinyl
- Photoluminescent materials
- Weatherproof and UV-resistant coatings
Critical & Non-Critical Spare Parts
We provide a reliable and comprehensive supply of both critical and non-critical spare parts to support uninterrupted operations across oil & gas, industrial and infrastructure sectors.
Critical spare parts
- Pump, motor and compressor components
- Control system parts and instrumentation devices
- Valves, actuators and regulators
- Electrical components (relays, breakers)
Non-critical spare parts
- Fasteners, seals and gaskets
- Filters and lubrication components
- Standard mechanical and electrical parts
- Consumables and maintenance items
Procurement & supply capabilities
- Global sourcing from trusted OEMs and manufacturers
- Emergency and expedited procurement services
- Competitive pricing and cost optimisation
- Supply of both standard and customised parts
Need a quotation or an urgent supply?
Attach the MTO, BOQ or marked-up drawing you already have. We come back with pricing, lead time and the certification that will arrive with the goods.